Monthly Archives: January 2023

Brake Repair Dont Let It Break The Bank!

Posted on by

As an experienced driver, you know that your vehicle’s brakes are an essential safety system. With complex hydraulic mechanisms and parts that need replacing on a regular basis, it’s tempting to put off brake service as long as possible to save a few pennies. Failing to keep up with routine brake repair and maintenance will be more costly in the long-run. However, that doesn’t mean you can’t try to reduce the cost of this necessity.
Check out these great ways to save money on your vehicle’s braking system.
Brake Service: Keep Up With Maintenance

Take care of routine brake service issues on schedule. Otherwise, it can cause damage to expensive parts. For example, if you overlook replacing your vehicle’s brake fluid for a long time, you could cause damage to the lines, calipers and the proportioning valve. Replacing all of those parts could be quite expensive, whereas bleeding your braking system would cost very little relatively. Check with your local auto technician for a quote.
Brake Repair: Use Quality Parts

It may be tempting to go for the cheapest parts possible in a brake repair, but mediocre replacement parts fail quicker than their name-brand counterparts. Imported rotors may cost very little, whereas a quality OEM rotor may be double that, but if you have to replace the cheaper rotor three times as often, you’ve lost any money you gained in the first place. Do yourself a favor and pick up OEM or mechanic-recommended equipment. Again, ask for a quote from your brake repair technician.
Change Your Driving Habits!

The most significant thing you can do to save money on brake repair costs is to change how you drive. Slowing down earlier, not coming to abrupt stops and not riding the brakes will go a long way toward making your car’s equipment last longer than it otherwise would.

Need a professional brake repair? Contact our ASE Certified Technicians at Clausen Automotive by calling (608) 221-8321 or go on-line at https://clausenautomotive.com for more information about our brake service. Since 1975, our family-owned auto shop has proudly served vehicle owners in Madison, WI, and the surrounding communities.

Musings On Automotive Transmission Maintenance And Repair In Tampa

Posted on by

Automotive transmission is one of the most expensive of the various car repair procedures a vehicle will be needing in its service life. Any auto service mechanic can tell you this. Its cost is not even close to what you may have spent on your auto AC repair. If you think that engine repair and brakes repair are so much more expensive than auto AC repair, just wait till you learn how much you will have to shell out for automotive transmission repair.

Early and frequent automotive transmission repair is something that any vehicle owner will want to avoid. This can be done by complying with all the required automotive transmission maintenance procedures. You can ask for assistance on proper compliance with all these automotive transmission maintenance procedures and tune ups from a trusted professional auto service shop. Doing this, however, does not mean that you can totally avoid car repair henceforth. The need for repair will still occur, but not as often. The auto service shop and its mechanic you choose should, therefore, be capable of helping you not only through automotive transmission maintenance and diagnostics but also for any necessary repair in Tampa.

A vehicle owner should also learn how to make transmission diagnostic tests regularly. One such test is the visual inspection for leaks. The ground or garage floor beneath the vehicle should always be checked for the presence of puddles or wet spots. Colored liquid can be a sign of danger. Dark or reddish liquid could mean dangerous leakage of the automotive transmission fluid. This could lead to failure of the transmission system and should immediately prompt the vehicle owner to bring the vehicle to the auto service shop in Tampa.

The vehicle owner should also check on the state of the transmission fluid. This is done with the use of the vehicles dipstick. The dipstick should first be wiped clean on a cloth rag, though. It is then dipped into the transmission fluid. The transmission fluid that adheres to the dipstick should then be allowed to drip on clean white paper. The ideal result is clear red fluid free of sediments. A dark color or the presence of metal fillings or flakes as well as a burnt smell means the fluid has oxidized. This means the transmission system should be checked at an auto service shop in Tampa.

Using the wrong type of transmission fluid is another cause for damage of the transmission system. Automatic and manual transmission systems each have their own special automotive transmission fluids that can not be used interchangeably. When doing transmission fluid change for the vehicle, the vehicle owner should make sure that the proper automotive transmission fluid is being used. This will be taken care of by a reputable auto service shop in Tampa.

The responsibility of the vehicle owner extends to observing the vehicles performance while driving. If the transmission gears lag in response and exhibit any noises, vibrations and jerks, the transmission system may already be worn down. It is time to have the vehicle checked at an auto service shop in Tampa.

The vehicle owner should always drive the vehicle properly in order to care for the automotive transmission system. Overheating should always be avoided because it results in burnt transmission fluid that creates oxidation deposits blocking the transmission system, warped metal parts, hardened rubber gaskets and seals, and leakage of transmission fluid. In effect, overheating threatens the entire transmission system. Overloading the vehicle and stop and go driving in hot Tampa weather should be avoided because they cause overheating.

A vehicle owner should always be aware of proper automotive transmission maintenance to lessen the need for towing services from tow trucks and car repair in Tampa.

Automotive Service To Winterize Your Vehicle 2 Components Overlooked!

Posted on by

To winterize their vehicle, most people are aware of the major parts or components of a vehicle that should be inspected during an automotive service, such as oil changes, tires, transmissions, and brakes. However, there are 2 other components that often get overlooked until they fail, leading to an inconvenient and costly automotive repair.
What are these 2 components? Belts and Hoses!

Your cars belts and hoses are essential to the interior heating system, electrical system, and engine. Dont take the routine replacement intervals of these small parts for granted or neglected during an automotive service, because they can fail unexpectedly and leave you stranded by the side of the road. This is especially annoying and even dangerous in winter driving when the temperatures are below freezing.
What is their purpose?

* Timing Belt This belt keeps the crankshaft and camshaft mechanically synchronized to maintain engine timing. Whether its the serpentine, V-belt or fan belt (the belts on the outside of the engine), they all transmit power from the front of the engine to accessories that need to be driven, such as the heating system, air conditioning, and the charging system and fans.
* Hoses Radiator and heater hoses carry coolant to and from the engine, radiator and heater core. They carry heated water to your cars interior heater which keeps the interior of your car warm when it is freezing outside.

Typical symptoms of wear and tear that are indicators to schedule an automotive service as soon as possible are

* You start to see fluid leaks on your garage floor
* The dashboard light flashes
* You hear squeaking noises coming from under the hood during start-up, or while driving.

Are you looking for expert automotive service? To keep your car rolling down the road, contact our ASE Certified Technicians today by calling (406) 248-2838, or go on-line to www.pricesprecisionauto.com for more information. They will be happy to help you with your car tune up services. Our Tech-Net professional auto repair shop in Billings, MT, also serves vehicle owners in the areas of Shepherd and Laurel, MT.

Getting Professionals to Build Deburring Equipment

Posted on by

When metal acquires burrs after being cut and shaped, it can create friction and improperly aligned pieces, especially for precision metalworks like gears and parts. In the metal working industry, deburring has become increasingly important as professionals in this industry try to find ways to remove the burrs and debris from metal but while still keeping the deburring processes moving along efficiently. Some companies have found ways to build deburring equipment that is custom tailored specifically for a gear, part or other metal piece. Indeed, the availability of portable grinding and polishing applications processes has increased the efficiency of this process.

Deburring equipment can come in many different forms, but typically it uses certain types of abrasives and brushes to clean, smooth and polish the surface and edges of a metal piece as it goes through the process. The end result of smooth metal surfaces within seconds has created a window of opportunity for those in this industry, as they are able to build deburring equipment that can be adapted for a client’s specific metalworking needs.

It can be difficult to find affordable and efficient ways to deburr complex parts that are custom designed for a particular need. It is not such a difficult undertaking when dealing with batches of the same types of parts or gears, but for customized applications, it can be difficult to find economical ways for this service without losing out on profit. When companies can help by building deburring equipment, this allows for the high performance deburring in smaller quantities but still at an affordable price.

It is a fact that deburring is a field in growing demand, since the need for deburring applications for smaller and more intricate parts grows as well. From small companies and individuals to large metalworking corporations, there is a universal need for technologically advanced and custom designed deburring applications.

From aeronautics to the medical field to industrial automotive industries, there is no field that does not need good deburring applications. It is important to find a company that can help with the most delicate and precise components to the largest batches of industrial gears; versatility is the crucial element when considering whom to chose to build deburring equipment. This delicate process can be handed over to professionals who can effectively streamline both the equipment and the deburring production processes. From mass finishing to customized deburring, there are professionals who can get the job done with the right equipment.